In this video we'll be making some really charming mushroom lights! Here are the LEDs we'll need to make this: Please note that the LEDs are wired in series on these strips, hence the 12v rating. The LEDs themselves are NEVER 12v individually, and are all in the 1.8v - 3.4v range. Also, if they have waterproofing silicone on top, just peel it off after cutting. Parts List: SMD LEDs (links above if you can't find any locally) Resistors (value calculated in the video) Clear silicone and watercolour paints Thin wire and stiff wire Wood (driftwood, bark, etc) Battery box for 3x AA batteries, with built-in switch: Battery Holder: Battery Holder (UK / EU): For this project we'll also need need the following tools: Plastic food wrap Scissors, wire cutters, and small pliers Soldering iron and solder Drill Silicone not drying in your plastic wrap? Try this: